1962 Chevy Impala / Biscayne Park Lights (Pair)

Finally, the update you’ve been looking for to modernize your 62 Impala or Biscayne hood!

They are made from extremely strong ABS plastic.

Lenses are included and pre-mounted for you.

LED lights are pre-mounted inside the housings.

These park lights mount directly in the existing location using the included hardware. Stock rivets need to be removed and replaced with the included screws..

Your stock park light housings are no longer required!

Installation Tips:

1. Remove your existing park lights, drill out the factory rivets.

2. Using the included hardware, install the new lights into the stock location..

3. Consult the wiring tips section for guidance before connecting the lights to your harness.

4. Congratulations! You have installed the new lights!

Wiring Tips:

1. You can wire these a number of different ways to achieve the look you want.

2. The black wire is the ground. The red wire is the running light. The yellow wire is the turn signal.

3. If you want the parking lights to turn on at startup and run continuously, you can connect the red wires to an accessory circuit in your system.

4. If you want the lights to turn on and off like the stock setup, just splice the wires into your stock harness.

1. In all installations, you must ground the black wire.