We are Loading stuff daily. If you dont see it it dont mean we dont sell it. give us a call.

1990-92 GM V8 TPI Harness (MAP) Std. Length

SKU: 60103

1990-92 GM V8 TPI Harness (MAP) Std. Length

painless performance
$458.99
$458.99 $509.99
Sale Sold out
/
Shipping calculated at checkout.
This is a pre order item. We will ship it when it comes in stock.

Engine: 5.0L, 5.7L Tuned Port Injection w/ Manifold Absolute Pressure Sensor (MAP)
Trans.: 200-4R, 700-R4 and Other Non-Electronic

Harness Length: 4 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based:  1990 Camaro
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

Connections Included:

ECM, MAP, O2, TPS, OPS, IAC, IAT, CTS, Knock, Injectors, Distributor, OBD1 w/SES light, VSS and TCC solenoid

This harness includes connections for the following components:

  • A/C Power
  • Brake Switch
  • Data Link Connector
  • Distributor
  • ECM
  • EGR Valve
  • Engine Coolant Temperature
  • Fan Relay Ground
  • Fuel Pump
  • Fuel Pump Relay
  • Fused System Power
  • Grounds
  • Idle Air Control
  • Ignition Switch Signal (Fused)
  • Ignition Timing Setting
  • Injectors
  • Knock Sensor
  • Malfunction Indicator Lamp
  • Manifold Air Temperature
  • MAP Sensor
  • O2 Sensor
  • Oil Pressure
  • Park/Neutral Indicator Switch
  • Starter
  • Throttle Position Sensor
  • Torque Converter Clutch
  • VATS
  • VSS 

     

    This harness is standalone and is not intended to replace the OEM engine wiring.  Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.  

    This harness is designed for 1990 – 1992 Tuned Port Injected  TPI 5.0L /5.7L V8 engines using the MAP speed density system. These engines were factory-equipped in Chevrolet Camaro and Corvette and were mated to either a 200-4R or 700R4 transmission.  Harnesses do not include all the original connections for the orginal emissions but are available separately, see the specs page for more details. Also available for this harness is a detailed step-by-step manual, and GM color-coded wires with labels for easy installation.

    This harness also requires the following mating parts; ECM #1227730, #16198262, or #88999196. The EPROM broadcast code must match tire diameter, gear ratio, engine size, and transmission.

    We recommend checking the online manual for the full list of required mating parts before ordering.